How to Check Email Domain Reputation Without a Gmail Score
If you want to know how to check email domain reputation today, you piece it together from several signals: the spam rate, authentication, compliance and delivery error dashboards in Google Postmaster Tools, plus the sender tools that other mailbox providers offer. The single domain reputation score you may remember is going away because Google is retiring the Domain and IP Reputation dashboards as Postmaster Tools moves to its v2 interface. The other dashboards are carrying over.
The change is confusing for a few reasons. Many older guides still tell you to start with the reputation score. Google’s own dashboard documentation still lists the reputation dashboards alongside the newer ones. Postmaster Tools has also always had a blind spot: it only reports on mail sent to personal Gmail and Googlemail accounts. A clean Gmail picture doesn’t tell you how Microsoft or Yahoo see your domain.
This guide walks you through what changed in Postmaster Tools and how to set it up and verify the right domain. It then shows you which dashboards to read in place of the old score and where to look for problems outside Gmail. Finally, it covers what to do if the signals suggest your domain’s reputation has taken a hit.
The short answer: how to check your email domain reputation today
You can’t check a single Gmail reputation score anymore. In Postmaster Tools v2, you judge your domain’s standing by reading several signals together. Google’s notice on retiring the old Postmaster Tools interface says every legacy dashboard moves to v2 except Domain Reputation and IP Reputation, which are being retired. If a guide tells you to look for a “High,” “Medium,” “Low” or “Bad” rating, it describes a view that is going away.
The information behind that old score hasn’t disappeared. It is now spread across four dashboards:
- Compliance status: whether your mail meets Gmail’s sender requirements.
- Spam rate: how often Gmail users mark your messages as spam.
- Authentication: how much of your mail passes SPF, DKIM and DMARC.
- Delivery errors: whether Gmail is rejecting or temporarily deferring your mail.
Read together, these four dashboards tell you how Gmail sees you. That is the limit, though. According to Google’s Postmaster Tools setup guide, the data only covers mail sent to personal Gmail accounts. It won’t show how Outlook, Yahoo or other mailbox providers treat your domain. You’ll need to check those separately.
Here is the quick version of the process this guide walks through:
- Verify your domain in Postmaster Tools. Use the domain that actually signs or sends your mail.
- Check compliance status to confirm you meet Gmail’s baseline requirements.
- Watch your spam rate over time instead of reacting to a single day.
- Review authentication and delivery errors for failures or rejections.
- Look beyond Gmail for reputation problems at other providers.
The sections below explain each step, what the numbers mean, and what to do if they point to trouble.
What changed in Google Postmaster Tools (and why older guides are wrong)
If you’ve followed an older tutorial and can’t find a Domain Reputation score, you aren’t doing anything wrong. Google is phasing that dashboard out. Its new version of Postmaster Tools doesn’t carry it over.
Here’s what Google has said in its notice about deprecating the old Postmaster Tools interface:
- Version 2 launched in 2024. It added a Compliance dashboard that helps senders track whether they follow Google’s sender guidelines.
- The old interface is on borrowed time. Google has postponed shutting down the legacy web interface, but says v1 will eventually be retired. Senders are encouraged to move to v2 now.
- Two dashboards won’t make the move. Every other dashboard is carried into v2. Domain Reputation and IP Reputation are the only ones being retired.
- More dashboards are planned. Google says it will add new dashboards with more actionable information. It hasn’t said what they’ll show or when they’ll arrive.
- The API is changing too. The Postmaster Tools API v2 is available, and the v1 API will stop working. If a third-party deliverability tool pulled your reputation score from Google, that data feed may change or stop. Check with the vendor about how they’re handling the switch.
Google’s own pages don’t fully agree yet
One thing can trip you up. Google’s Postmaster Tools dashboards help page still lists Domain Reputation and IP Reputation alongside the other dashboards. The deprecation notice is the more current statement, so treat it as the one to follow. Don’t build your monitoring around a score that’s being removed. Plan around the dashboards that remain.
The rest of this guide shows you how to do that, starting with getting the right domain verified.
Step 1: Set up Postmaster Tools and verify the right domain
To get data, sign in with a Google account, add the domain your emails are actually authenticated with, and verify it through DNS. Most setup problems come from adding the wrong domain, so it’s worth a minute to check before you start.
- Sign in with a Google Account or Google Workspace account. You need one to use Postmaster Tools. It doesn’t have to be the address you send from.
- Add the domain that authenticates your mail. This is the DKIM signing domain (the d= value in your DKIM signature) or the SPF domain (your Return-Path). It isn’t always the domain your website uses. If you send through an email platform, open the headers of a message you sent and check which domain appears in those fields.
- Verify ownership with a DNS record. Postmaster Tools gives you a TXT record to add at your DNS host. Once it’s published, go back and confirm.
- Wait for the status to update. Google usually verifies right away, but Google’s setup instructions say it can take up to 10 minutes. You won’t see any data for a domain until it’s verified.
Subdomains
If you send from subdomains, such as one for newsletters and another for receipts, add each one separately to see its dashboards on their own. Once the primary domain is verified, its subdomains don’t need separate verification.
If your SPF or DKIM isn’t in place yet
Postmaster Tools relies on authentication to match mail to your domain. If you aren’t sure your records are configured, start by getting SPF, DKIM and DMARC set up correctly and then add the domain.
The data covers mail sent to personal Gmail and Googlemail accounts only, not Google Workspace inboxes. It gives you a useful view of Gmail but not of every mailbox provider.

Step 2: Read the dashboards that now stand in for a sender reputation score
No single number tells you how Gmail sees your domain anymore. Instead, read a handful of dashboards together, starting at the top and working down.
Compliance status: fix this first
This dashboard shows whether your domain meets the requirements in Google’s email sender guidelines. If anything isn’t passing, fix it before you dig into anything else. A failing requirement makes the rest of your numbers harder to interpret.
Spam rate: the closest thing to a score
Spam rate is the percentage of messages delivered to the inbox that recipients then marked as spam. Mail that landed in spam and was later marked “not spam” also counts as delivered to the inbox. Google’s email sender guidelines say to keep the spam rate reported in Postmaster Tools below 0.10% and never let it reach 0.30% or higher. Google also warns that a consistently high spam rate leads to more of your mail being filtered as spam, and that improvements can take time to show up.
The supporting dashboards
| Dashboard | What it shows | What to watch for |
|---|---|---|
| Authentication | The percentage of mail passing SPF, DKIM and DMARC | Any drop, especially after DNS or sending platform changes |
| Encryption | The share of mail sent over TLS | Unencrypted traffic you didn’t expect |
| Delivery errors | Mail that was rejected or temporarily failed | Sudden spikes in rejections or temporary failures |
| Feedback loop | Which campaigns recipients report as spam | Campaigns that draw more complaints than the rest |
Look at trends, not single days
Each dashboard can be viewed over 7, 30, 60, 90 or 120 days, according to Google’s Postmaster Tools dashboard documentation. Use the longer ranges to see whether a problem is building or fading rather than reacting to one bad day.
When complaints climb, the cause usually traces back to who’s on the list. Old, purchased or unengaged contacts are common culprits, which is why solid list management and hygiene is often the most direct way to bring a spam rate back down.
Step 3: Check for reputation problems outside Gmail
A clean Gmail picture doesn’t mean your domain is healthy everywhere. Google explains that Postmaster Tools data only covers mail sent to personal Gmail and Googlemail accounts. Mail to business inboxes on other platforms, or to other consumer mailbox providers, isn’t part of that view. If your list includes those addresses, which most lists do, you need a few more checks.
Look at your own sending data by provider
Start with the reports in your email platform. Group bounces, deferrals and opens by recipient domain where you can. If Gmail looks steady but one provider shows a jump in rejections or a sudden drop in engagement, that pattern is a signal to investigate. It doesn’t prove a reputation problem, but it tells you where to look next.
Check blocklists
Blocklist listings are another reputation signal worth checking. A listing on your sending IP or domain can affect delivery at providers that consult that list, even when Gmail shows no trouble. For step-by-step lookups, how to read the results and what to do afterward, see our guide on how to tell if you’re on an email blacklist.
Confirm your DNS and authentication records
Authentication problems can look like reputation problems from the outside. Run a fresh lookup on the records that tie your mail to your domain:
- SPF: make sure it lists every service that sends on your behalf.
- DKIM: confirm the signing domain matches the domain you’re monitoring.
- DMARC: check that a record exists and that the policy is what you intended.
Our page of free deliverability tools and resources links to lookups for these records.
No single check gives you the full picture. Each one covers a different piece, so run them together. Then compare what they show against your Gmail dashboards before you decide what to fix.

What to do if the signals point to a damaged domain reputation
Fix the causes first: tighten authentication, cut complaints, and stop mailing people who don’t want your email. Then give the changes time to show up. Google’s email sender guidelines give you both the checklist and the target. Keep your Postmaster Tools spam rate below 0.10%, and never let it reach 0.30%.
Start with the basics Google asks for
- Authenticate your mail. Confirm that SPF and DKIM are set up for the domains you send from, and that your messages pass both checks.
- Keep complaints low. Send only to people who asked to hear from you, and make every message match what they signed up for.
- Make unsubscribing easy. A clear, working unsubscribe option gives people a better choice than the spam button.
Bring the spam rate down before you send more
A high spam rate leads Gmail to put more of your mail in spam. Sending more volume to the same audience usually makes the problem worse. Before your next campaign, remove recipients who have complained. Then suppress the people who haven’t opened or clicked in a long time. A smaller list of engaged readers protects your domain better than a large list of people who ignore you.
Expect recovery to take a while
Google notes that improvements in your spam rate can take time to change how your mail is classified. Keep watching your dashboards week over week, and judge progress by the trend rather than any single day.
Nobody can promise a specific outcome. Recovery depends on finding and fixing whatever caused the damage in the first place. If you’d like help working through it, our domain reputation repair page explains how we approach it. If you just want a second pair of eyes on your data, you’re welcome to book a free consult.
Keep researching on Digital Bulldogs
Frequently asked questions
Does Google Postmaster Tools still show a domain reputation score?
Not in the new version. Google says nearly every dashboard from the old interface is moving to Postmaster Tools v2, but the Domain and IP Reputation dashboards will be retired instead of migrated. The legacy interface’s shutdown has been postponed, so you may still see those dashboards for now. Don’t build your monitoring around them. Track your spam rate, authentication and compliance status, because those are the signals that will continue.
What spam rate should I aim for in Postmaster Tools?
Google’s guidance is to keep your Postmaster Tools spam rate below 0.10% and never let it reach 0.30%. A higher rate makes it more likely that Gmail sends more of your mail to spam. Recovery is gradual, so even after you fix the cause, it can take a while for your results to improve.
Why is my Postmaster Tools dashboard empty?
The most common reason is that the domain hasn’t been verified yet. Postmaster Tools shows nothing until verification is complete. According to Google, verification usually happens right away but can take up to 10 minutes. If the domain is verified and the dashboard is still blank, check whether you added a domain that matches your outgoing mail. Also remember that the data only reflects mail sent to personal Gmail accounts.
Which domain should I add to Postmaster Tools: my website domain or my sending domain?
Add the domain your mail is authenticated with. That means the domain in your DKIM signature’s d= tag or the domain in your SPF Return-Path. Your website domain is the right choice only if it is also one of those domains. If your email platform signs with its own domain or with a subdomain of yours, use that domain. Otherwise your dashboard may stay empty even though you are sending plenty of mail.
Does Postmaster Tools show how Outlook, Yahoo or Google Workspace inboxes treat my email?
No. Postmaster Tools only reports on mail delivered to personal Gmail and Googlemail accounts. It doesn’t cover Outlook, Yahoo or Google Workspace business inboxes. To see how other mailbox providers treat your mail, use the tools described in Step 3 above. If the signals conflict or you can’t tell what they mean, you can book a free consult with Digital Bulldogs to review them together.
Sources
- Learn about the deprecation of the old Postmaster Tools interface · Google (Gmail Help)
- Postmaster Tools dashboards · Google (Gmail Help)
- Set up Postmaster Tools · Google (Gmail Help)
- Email sender guidelines · Google (Gmail Help)
This article is general information, not legal advice. Laws and deadlines vary by state and change over time; check the linked sources or speak with a licensed attorney about your situation.


2 Comments